|
|
|
Home |
Folding Stool
Folding Stool Parts
Top
2 1/8 x 12 1/2 x 3/4 (4) Round 2 ends
on both end pieces
1 x 12 1/2 x 3/4 (2) Center pieces
Leg
Braces
1 1/2 x 12 1/2 x 3/4 (2) Round ends
Legs
1 1/2 x 18 x 3/4 (4) Round tops & 45 the bottoms
inside edge 7/8", outside edge 3/8" from bottom
Top Supports
1 1/2 x 11 x 3/4 (4) Round tops and 45 outside
corner 1/2" from end
Assembly
The rounded tops of the 4 legs and 4 top supports need a 1/2" hole
centered in them 3/4" from outside edge to accept a 1/2" dowel.
The 4 legs need another 1/2" hole centered 7 1/2" from outside edge.
Cut 1/2" dowels (4) for legs and top support pivot points. Glue and
pin dowel on inside so outsides will move ( looks
better ).
The bottom leg brace is installed 1
1/2" from bottom.
The long dowel holding the legs and
top supports together is 9 1/2" long.
1/2" spacing between seat slats.
|
